• POPULAR COMBO
  • BIKE SPECIFIC KITS
  • SPEAKERS ONLY
  • AMPS ONLY
  • SADDLE BAG LID KITS
Tab 1
2 Amplifiers, 6 Main Speakers and Tweeter Pod
  • Overview
  • BIke Year/Model Fitment
  • Videos
  • Installation Manual
Tab 1
Only $1339.75 USD
  1. Add Front Mesh Grills
Stacks Image 19606

2 Amplifiers, 6 Main Speakers and Tweeter Pod
Drag Specialties
Part #’s 4405-0339, 4405-0341, 4405-0233, 4405-0234, 4405-0172

• The 2 amps make 800 peak watts and easily mount inside the fairing
• Includes our new Gen 3 5.25” 2 Ohm Front and Rear Speakers
• Includes our 7.0” Fairing Lower Woofer Kit
Tweeter Pod looks great and adds another level of clarity at speed  
• 4 Channel Amplifier is suspended above radio using supplied mounting arms
• 2 Channel Amp Bolts In Fairing Using Supplied Mounting Plate
• Includes all required 100% plug and play wire harness
• Real loud and real clear and still ok for bikes charging system
• All required hardware to complete the installation is included
• Compatible with most aftermarket radios
• 3 Year Warranty on Amps—20 year warranty on speakers

Our Most Popular BIG System For Ultra Classics!
Tab 2
2000- 2013 Ultra Classic/Ultra Limited
2009- 2013
Tri Glide® Ultra
2006- 2013
Street Glide® (if King Tour Pak and lower glove boxes have been added)
2000- 2013 Electra Glide® Classic (if lower glove boxes and rear pods have been added)
Tab 3
These 5 Videos Cover The Complete Installation of This Hogtunes Package
Stacks Image 19616
thex Created with Sketch.

HF-1 Tweeter Pod Installation Video

Stacks Image 19625
thex Created with Sketch.

Front Speaker Installation Video

Stacks Image 19634
thex Created with Sketch.

Rear Speaker Installation Video

Stacks Image 19643
thex Created with Sketch.

Amplifier Installation Video

Stacks Image 19652

thex Created with Sketch.

Fairing Lower Speaker Installation Video

Tab 4
PDF Manual Download
Tab 2
4 Channel Amp/Speaker Kit
  • Overview
  • BIke Year/Model Fitment
  • Videos
  • Installation Manual
Tab 1
Only $589.95 USD
  1. Add Front Mesh Grills
Stacks Image 19904

NCA 450U KIT-AA

Drag Specialties part #4405-0339
 
• The 200 watt (400 Peak) 4 channel amp easily mounts inside the fairing
• Includes our new Gen 3 5.25” 2 Ohm Front and Rear speakers
• Radios built in fader/CB module etc. will work as they did from factory
• Amplifier is suspended above radio using supplied mounting arms
• Includes shelf to easily relocate factory CB module under radio
• Includes 100% plug and play wire harness
• Wire harness has plug built in for quick release tour paks
• Real loud and real clear with minimal strain on the bikes charging system
• All required hardware to complete the installation is in the box
• Take it to the next level by adding our HF 1 tweeter pod (Drag part # 4405-0172)  
• Compatible with most aftermarket radios
• Fully expandable for future upgrades
• 3 Year Warranty

By Far Our Most Popular Complete Kit!
Tab 2
2000- 2013 Ultra Classic/Ultra Limited
2009- 2013
Tri Glide® Ultra
2006- 2013
Street Glide® (if King Tour Pak and rear speaker boxes have been added)
1998- 2013
Electra Glide® Classic (if rear speaker boxes have been added)
2004- 2005
CVO® Electra Glide Classic (if King Tour Pak and rear speaker boxes have been added)
Tab 3
These 3 Videos Cover The Complete Installation of This Hogtunes NCA 450U Kit-AA
Stacks Image 19914
thex Created with Sketch.

Front Speaker Installation Video

Stacks Image 19923
thex Created with Sketch.

Rear Speaker Installation Video

Stacks Image 19932
thex Created with Sketch.

Amplifier Installation Video

Tab 4
Fairing Lower Speaker/Amp Kit
  • Overview
  • BIke Year/Model Fitment
  • Videos
  • Installation Manual
Tab 1
Only $349.95 USD
FLSK/AMP
Drag Specialties part #4405-0134

• Includes 32x2 Watt Amplifier with MAXXBASS® for increased bass response
• Includes Gen 2 5.25”front speakers, adaptors to mount speakers, grills and all hardware
• Supplied speaker adaptors help point speakers up towards rider for improved performance
• Fits perfectly on bikes with 1998-2013 Ultra Classic style fairing lowers
• Includes complete plug and play wire harness
• Is a great addition for bikes using radio power for fairing speakers while supplied amp runs lower speakers
• Easy to add to bikes with existing Hogtunes 4 channel amps
• 20 Year Warranty on speakers/3 years on amp


An Easy Way To Add Sound To Your Lower Glove Boxes!
Tab 2
1998- 2013 Ultra Classic
2009- 2013
Tri Glide® Ultra
2004- 2005
CVO® Electra Glide Classic
2006- 2010
CVO® Ultra Classic **
2011- 2013
CVO® Ultra Classic***
2011- 2013
Road Glide® Ultra*
2006- 2013
Street Glide® (with fairing lowers added to bike)
1998- 2013
Electra Glide® Classic (with fairing lowers added to bike)
2013 Road Glide®* (with fairing lowers added to bike)

* Requires additional purchase of Road Glide Adaptor plate for amplifier (Drag part# 4405-0096)
** Requires special instruction sheet—please email here and we will email it to you
*** Requires special instruction sheet. Also requires splicing 4 wires into factory wires-- please email here and we will email it to you
Tab 3
Stacks Image 11559
thex Created with Sketch.
Tab 4
Tab 3
Tweeter Pod/Dash Trim
  • Overview
  • BIke Year/Model Fitment
  • Videos
  • Installation Manual
Tab 1
Only $189.95 USD
  1. Add Windscreen Bag
Stacks Image 18424

HF-1 Tweeter Pod/Dash Trim Patent No:D602,478 S
Drag Specialties part #4405-0172

• Includes custom designed high efficiency metalized dome tweeters
• Radically improves the clarity of any sound system from bone stock to crazy big
• Fits perfectly on stock inner fairings
• Works with all stock systems, Hogtunes systems, other brands of systems, or bikes with car radios
• Pod comes satin black and matches stock inner fairings perfectly
• Disassembles very easily if you want to paint the main body
• Comes with dead easy drilling template and plug and play wiring
• Supplied metal mesh grills come gloss black but can be painted, chromed etc
• 20 Year Warranty on speakers


The Easiest Way To Improve Any FLH Sound System!
Tab 2
2006- 2013 Street Glide®
1998- 2013 Electra Glide® Classic
1998- 2013 Ultra Classic
2009- 2013
Tri Glide® Ultra
2004- 2005 CVO® Electra Glide® Classic
2006-2 010
CVO ®Ultra Classic *
2011- 2013
CVO® Ultra Classic**

*R
eplaces factory leather dash pad
** Will not work if you have factory fairing mount GPS
Tab 3
Stacks Image 11765

thex Created with Sketch.

HF-1 Tweeter Pod Installation Video

Tab 4
5.25" Front Speakers
  • Overview
  • BIke Year/Model Fitment
  • Videos
  • Installation Manual
Tab 1
Only $119.95/pr USD
  1. Add Front Mesh Grills
Stacks Image 18690

356F Front Speakers

Drag Specialties part #4405-0327
 
• Gen 3 - 5.25” – 6 Ohm Front Speakers  
• Oversized vented magnet properly controls heat for added reliability
• Sound is tailored to cut through exhaust and wind noise when bike is “at speed”
• Speaker passed testing with 75 watts RMS running them for 8 full hours before power rating was given
• Can take peaks of 300 watts
• Install using factory grills or use Hogtunes SGF Grill-AA metal mesh grills (Drag Part# 4405-0379)
• Compatible with bikes with car radio conversion kits
• 20 Year Warranty
 
The Speaker That Launched Our Brand!
Tab 2
1998- 2005 Electra Glide® Classic
2004- 2005
CVO Electra Glide® Classic
1998- 2005
Ultra Classic
1998- 2005
Road Glide®
1998- 2005
Electra Glide® Standard (if factory radio or car radio is installed)
 
This speaker is also compatible on bikes that had the factory amplifier installed (under tour pak®)
Tab 3
Stacks Image 20022
thex Created with Sketch.

Front Speaker Installation Video

Tab 4
5.25" Rear Speakers
  • Overview
  • BIke Year/Model Fitment
  • Videos
  • Installation Manual
Tab 1
Only $119.95/pr USD
356R Rear Speakers
Drag Specialties part #4405-0328
 
• Gen 3 - 5.25” – 6 Ohm Rear Speakers for Ultra Classics  
• Vented magnet properly controls heat for added reliability
• Sound is tailored to cut through exhaust and wind noise when bike is “at speed”
• Speaker passed testing with 75 watts RMS running them for 8 full hours before power rating was given
• Can take peaks of 300 watts
• Compatible with bikes with car radio conversion kits
• 20 Year Warranty
 
Rear Speaker For Ultra Classic!
Tab 2
1998- 2005 Ultra Classic
 
This speaker is also compatible on bikes that had the factory amplifier installed (under tour pak®)
Tab 3
Stacks Image 19983
thex Created with Sketch.

Rear Speaker Installation Video

Tab 4
Tab 4
2 Channel Amplifier
  • Overview
  • BIke Year/Model Fitment
  • Videos
  • Installation Manual
Tab 1
Only $299.95 USD
  1. Add Mounting Plate
Stacks Image 17990

REV 200-RM

Drag Specialties part #4405-0341
 
·The 200 watt (400 Peak) 2channel Class D amp easily mounts inside the fairing
·This amplifier makes its best power with 2 ohm speakers
• Includes 100% plug and play wire harness
• Real loud and real clear with minimal strain on the bikes charging system
• All required hardware to complete the installation is in the box
• Systems with this amp are easily expandable for future upgrades
• 3 Year Warranty
A Very Popular Amp For Street Glide and Road Glide Models
Tab 2
2006- 2013 Street Glide®
1998- 2013
Electra Glide® Classic
2004- 2005
CVO® Electra Glide® Classic
1998- 2010
Electra Glide® Standard (If factory radio option was installed)
1998- 2013
Ultra Classic
1998- 2013
Road Glide®*
2011- 2013
Road Glide® Ultra* (amp powers fronts while radio powers rears)
2009- 2013
Tri Glide® Ultra (amp powers fronts while radio powers rears)
2010- 2011
Street Glide® Trike
 
Note: There are many options to make this amp work on your bike. If you are not sure, please email us before purchasing
 
*Requires separate purchase of Road Glide Mounting Plate (Drag Specialties Part # 4405-0096 or 4405-0232 depending on system)
Tab 3
Stacks Image 12770

thex Created with Sketch.

Amplifier Installation Video

Tab 4
4 Channel Amplifier
  • Overview
  • BIke Year/Model Fitment
  • Videos
  • Installation Manual
Tab 1
Only $399.95 USD
NCA 450-AA
Drag Specialties part #4405-0338
 
• The 200 watt (400 Peak) 4 channel amp easily mounts inside the fairing
• This amplifier makes its best power with 2 ohm speakers
• Includes 100% plug and play wire harness
• Real loud and real clear with minimal strain on the bikes charging system
• All required hardware to complete the installation is in the box
• Compatible with most aftermarket radios
• “Low level” input  allows amp to run off hand held music player instead of a radio
• Systems with this amp are easily expandable for future upgrades
• 3 Year Warranty

Our Most Popular Amplifier!
Tab 2
2006- 2013 Street Glide®
1998- 2013
Electra Glide® Classic
2004- 2005
CVO® Electra Glide® Classic
1998- 2010
Electra Glide® Standard (If factory radio option was installed)
1998- 2013
Ultra Classic
2009- 2013
Tri Glide® Ultra
2010- 2011 Street Glide® Trike
 
Note: There are many options to make this amp work on your bike. If you are not sure, please email us before purchasing
Tab 3
Stacks Image 12998

thex Created with Sketch.

Amplifier Installation Video

Tab 4
Tab 5
Complete Lid Kit including 6x9" Speakers
  • Overview
  • BIke Year/Model Fitment
  • Videos
  • Installation Manual
Tab 1
Only $589.95/pr USD
692.2/Lids
Drag Specialties part #4405-0289

• High impact ABS replacement saddlebag lids with performance 6x9” speakers
• Little or no body work required due to high quality moulding process
• Come out of the box coated in matte black primer
• Grills feature 1mm thick (“boot worthy”) metal mesh that comes painted gloss black
• Includes 200 watt custom 6x9”woofers specifically made for motorcycle environment
• 6x9’speakers can take peaks of 500 watts
• 1.25”custom tweeter mounted on cool mounting bridge
• Speakers are angled towards rider for best sound quality available
• Built in drainage channels prevent water from entering saddle bags
• Disassembles easily for paint
• Kit includes All gaskets, grommets, striker plates, lid hinges, wire harnesses—everything you will need
• Supplied wire harness plugs into any Hogtunes amp and is easily modified for other amplifier brands
• 20 Year Warranty on speakers

The “Mac Daddy” Speaker Lid Kit Period!
Tab 2
Fits all bikes with 1998-2013 OEM “hard” Saddlebags installed. May fit factory saddlebags prior to model year 1998. May not fit with some aftermarket saddlebags. Please email us or consult your dealer before purchasing if your not sure.

Required amplifier or RR Plug-AA is not included!
Tab 3
Stacks Image 13532

thex Created with Sketch.

Complete Lid Speaker Installation Video

Tab 4
Lid Kit with Hardware - speakers sold separately
  • Overview
  • BIke Year/Model Fitment
  • Videos
  • Installation Manual
Tab 1
Only $399.95/pr USD
HT Lids
Drag Specialties part #4405-0290

• High impact ABS replacement saddlebag lids that will accept most car stereo 6x9”speakers
• Little or no body work required due to high quality moulding process
• Come out of the box coated in matte black primer
• Grills feature 1mm thick (“boot worthy”) metal mesh that comes painted gloss black
• Speakers are angled towards rider for best sound quality available
• Built in drainage channels prevent water from entering saddle bags
• Disassembles easily for paint
• Kit includes All gaskets, grommets, striker plates, lid hinges, wire harnesses—everything you will need
• Supplied wire harness plugs into any Hogtunes amp and is easily modified for other amplifier brands

Note: Most car speakers are not water proof or water resistant. If you choose another brand of speakers, Hogtunes accepts zero responsibility for damage to speakers or contents in your saddlebags!

The Bag Lids Everyone Else Wishes They Had!
Tab 2
Fits all bikes with 1998-2013 OEM “hard” Saddlebags installed. May fit factory saddlebags prior to model year 1998. May not fit with some aftermarket saddlebags. Please email us or consult your dealer before purchasing if your not sure.
Tab 3
Stacks Image 14491

thex Created with Sketch.
Tab 4

Front Speaker Options

5.25" 5.75 ohm Front Replacement speakers
Stacks Image 15140
$119.95/pr USD
Replacement Steel Mesh Grills
Stacks Image 15152
$29.95/pr USD

For complete kits and detailed information including fitment, installation videos and manuals see tabs below

Lower Glove Box Options

5.25" speakers with amplifier complete kit
Stacks Image 11093
$349.95 USD

For complete kits and detailed information including fitment, installation videos and manuals see tabs below

In Fairing Amplifier Options

200 watt 2 channel amplifier
Stacks Image 10619
$299.95 USD
200 watt 4 channel amplifier for that bigger build
Stacks Image 10631
$399.95 USD

For complete kits and detailed information including fitment, installation videos and manuals see tabs below

Tour PakĀ® Options

5.25" 5.75 ohm Rear Speakers
Stacks Image 15312
$119.95/pr USD
Rear Speaker Pods with harness - speakers not included
Stacks Image 15324
$199.95/pr USD

For complete kits and detailed information including fitment, installation videos and manuals see tabs below

Saddle Bag Lid Options

Complete Lit Kit with Speakers
Stacks Image 10951
$589.95/pr USD
Lid Kit with out speakers
Stacks Image 10963
$399.95/pr USD

For complete kits and detailed information including fitment, installation videos and manuals see tabs below

Stacks Image 15705