Stacks Image 8302
Stacks Image 22756
  • Overview
  • BIke Year/Model Fitment
  • Videos
  • Installation Manual
Tab 1
Only $69.95 USD
DUAL 200-RM SG Kit
Drag Specialties part #4405-0461

  •  Kit includes bolt on metal plate that holds 2x Rev 200-RM (4405-0352)
  • includes an replacement 8 gauge “splitter” power harness
  • all other required plug and play harness and hardware to complete the install
 
Tab 2
  • 2014+ Street Glide and Ultra Classic Fairings
Tab 3
Stacks Image 22777
thex Created with Sketch.
Tab 4
Stacks Image 22720
  • Overview
  • BIke Year/Model Fitment
  • Videos
  • Installation Manual
Tab 1
Only $69.95 USD
DUAL 200-RM RG Kit
Drag Specialties part #4405-0462
 
  •  Kit includes bolt on metal plate that holds 2x Rev 200-RM (4405-0352)
  • includes an replacement 8 gauge “splitter” power harness
  • all other required plug and play harness and hardware to complete the install
Tab 2
  • 2015+ Road Glide® inner Fairings
Tab 3
Stacks Image 22741
thex Created with Sketch.
Tab 4
Stacks Image 22673

Click Here to Watch The Product Video NOW!

Click Here to Watch The Product Video NOW!

  • Overview
  • BIke Year/Model Fitment
  • Videos
  • Installation Manual
Tab 1
Only $119.95 USD
BTS-AA
Drag Specialties part #4401-0203
 
• Adds Bluetooth VIA factory radio AUX input
• Replaces factory ambient air temperature gauge
• Easy plug and play installation

• Additional input for satellite radio/ GPS etc
• HD accessory chrome rings fit perfectly
• Backlights for easy viewing at night
• Works with any radio that has 1/8" input
• Ability to pair with up to 9 wireless devices

 
In Fairing Wireless Music Controller
Tab 2
1999- 2013 Bikes with factory radio installed
Tab 3
Stacks Image 22696
thex Created with Sketch.
Tab 4
Stacks Image 13594
  • Overview
  • BIke Year/Model Fitment
  • Videos
  • Installation Manual
Tab 1
Only $49.95 USD
RR PLUG-AA
Drag Specialties part #2120-0771
 
• Gives easy access to factory radios built in rear speaker outputs
• Plugs directly into empty 35 pin socket on back of radio
• Other end plugs directly into Hogtunes rear pods or saddle bag lid harnesses
• 4 pin plug also plugs into rear input on Hogtunes NCA 450-AA amplifier
• Wires are clearly labeled if using to hardwire to another brand of product
 
NOTE: This plug accesses the speaker leads of the radio but DOES NOT activate your radios built in fader control. To have your fader function “turned on” you must go to a Harley-Davidsonâ dealer and have your radio “re-flashed”.
Easily Access Your Radios Rear Speaker Leads!
Tab 2
2006- 2013 Street Glide® with factory radio installed
2006- 2013
Electra Glide® Classic with factory radio installed
2006- 2013
Road Glide® with factory radio installed
2006- 2010
Electra Glide® Standard if factory radio option was installed
Tab 3
Stacks Image 13619
thex Created with Sketch.
Tab 4
Stacks Image 13662
  • Overview
  • BIke Year/Model Fitment
  • Videos
  • Installation Manual
Tab 1
Only $199.95/pr USD
Rear Speaker Pods
Drag Specialties part #4405-0229

• Quality add on rear pods for King tour paks
• Vinyl wrapped with material that matches color of stock seat
• These pods will fit the larger magnet of Hogtunes 5.25” front speakers (not included)
• Stock looking grills are included
• Factory chrome grill rings fit supplied grills perfectly
• Built in plug for quick release tour paks
• Supplied wire harness plugs into Hogtunes amps and is easily modified for other brands
• All require mounting hardware is included


Easy To Add On Rear Speaker Boxes!
Note: Please see RR Plug-AA if using radio power for rear speakers.
Tab 2
Fits all bikes with King Tour paks® that came stock on 1994-2013 bikes. Does not fit leather tour paks® from 2006/2007 CVO®Ultras
Tab 3
Stacks Image 13687
thex Created with Sketch.
Tab 4
Stacks Image 13426
  • Overview
  • BIke Year/Model Fitment
  • Videos
  • Installation Manual
Tab 1
Only $89.95/pr USD
WS BAG
Drag Specialties part #3508-0023

• 4 Pouch Windshield Bag
• Works on bikes with or without Hogtunes HF1 tweeter pod (Drag part# 4405-0172) installed
• 3 good size compartments in front like traditional windshield bags
• Works with “Flare” windshields 8.5” or taller
• 1 large zippered compartment goes entire width of bag
• 3 front compartments close with Velcro (no magnets to upset credit cards or hotel room cards)
• Has an “X Grommet” to allow an audio cable pass from bag to aux in on front of radio
• Work great with Hogtunes 0401 audio cable (Drag part# 4401-0072)


The Perfect Touring Bike Audio Add On!
Tab 2
2006- 2013 Street Glide®
1996- 2013
Electra Glide® Classic
1996- 2013 Ultra Classic
2009- 2013
Tri Glide® Ultra
2004- 2005
CVO® Electra Glide® Classic
2006- 2010
CVO® Ultra Classic
2011- 2013
CVO® Ultra Classic*

*Will not work if you have factory fairing mount GPS
Tab 3
Stacks Image 13453
thex Created with Sketch.
Tab 4
Stacks Image 14503
  • Overview
  • BIke Year/Model Fitment
  • Videos
  • Installation Manual
Tab 1
Only $39.95 USD
2CHSP 2 Channel Side Plate
Drag Specialties part #4405-0234

• Plate allows a Hogtunes REV-200-AA, NCA 70.2or USA 24.2 to be side mounted in fairing
• Places amp perfectly between radio and brake side speaker
• Plate replaces brake side factory fairing bracket
• Is required to put a 2nd amp in if you already have another amp on top of radio
• Stamped (and painted) steel for a perfect fit
• Includes Hogtunes “Bypass harness” used to “daisy chain” Hogtunes amps together
• Includes all required hardware for installation


2nd Amp Install For FLH Made Easy!
Tab 2
2006- 2013 Street Glide®
1998- 2013
Electra Glide® Classic
1998- 2013 Ultra Classic
2009- 2013 Tri Glide® Ultra
Tab 3
Stacks Image 14528
thex Created with Sketch.
Tab 4
Stacks Image 22088
  • Overview
  • BIke Year/Model Fitment
  • Videos
  • Installation Manual
Tab 1
Only $29.95 USD
RGRM2CH Amp Adaptor Plate
Drag Specialties part #4405-0423

• Adaptor Plate to install REV 200-RM 2 Channel Amp into 2015+ Road Glides®
• Amplifier easily adheres to metal plate
• Plate locates amplifier inside fairing directly below factory radio
• Plate installs amplifier without requiring radio removal
• Plate is secured in place using factory headlight assembly bolts


2 Channel Amp Install Kit For 2015+ Road Glide!
Tab 2
2015+ Road Glide®
2016+ Road Glide® Ultra
Tab 3
Stacks Image 22149
thex Created with Sketch.
Tab 4
Stacks Image 15725
  • Overview
  • BIke Year/Model Fitment
  • Videos
  • Installation Manual
Tab 1
Only $29.95 USD
RGRM4CH Amp Adaptor Kit
Drag Specialties part #4405-0391

• Adaptor Plate to install NCA 450-RM 4 Channel Amp into 2015+ Road Glides®
• 2 included custom metal plates bolt into underside of amplifier
• Amp located inside fairing directly below factory radio
• Amp is secured in place using factory bolts
• Plates attach to mounting points for factory headlight assembly
• Includes Hogtunes “Bypass harness” used to “daisy chain” Hogtunes amps together


4 Channel Amp Install Kit For 2015+ Road Glide!
Tab 2
2015+ Road Glide®
2016+ Road Glide® Ultra
Tab 3
Stacks Image 15756
thex Created with Sketch.
Tab 4
Stacks Image 14660
  • Overview
  • BIke Year/Model Fitment
  • Videos
  • Installation Manual
Tab 1
Only $39.95 USD
RG4CH-AA Adaptor Plate
Drag Specialties part #4405-0405

• Bolts Hogtunes REV 200-AA, NCA 70.2, USA 24.2 or NCA 40.4 in Road Glide fairings
• Locates amp on far side of inner fairing, just above turn signal bolts on brake side
• Stamped (painted black) Steel for a perfect fit
• Can be used if this is the first or second 2 channel amp in the Road Glide fairing
• Is required to mount NCA 40.4 in Road Glide fairing
• Includes all required hardware for installation


Amplifier Plate For Road Glide Fairings!
Tab 2
1998- 2013 Road Glide®
2011- 2013
Road Glide® Ultra
Tab 3
Stacks Image 14685
thex Created with Sketch.
Tab 4
Stacks Image 14773
  • Overview
  • BIke Year/Model Fitment
  • Videos
  • Installation Manual
Tab 1
Only $39.95 USD
RG Adaptor Plate
Drag Specialties part #4405-0096

• Bolts Hogtunes REV 200-AA NCA 70.2 or USA 24.2 in Road Glide fairings
• Plate bolts onto 2 of the 4 main studs that attach inner fairing to bike
• Stamped (painted black) Steel for a perfect fit
• Can be used if this is the first or second 2 channel amp in the Road Glide fairing
• Includes all required hardware for installation

Amplifier Plate For Road Glide Fairings!
Tab 2
1998- 2013 Road Glide®
2011- 2013
Road Glide® Ultra
Tab 3
Stacks Image 14798
thex Created with Sketch.
Tab 4
Stacks Image 14930
  • Overview
  • BIke Year/Model Fitment
  • Videos
  • Installation Manual
Tab 1
Only $14.95 USD
0401 Audio Cable
Drag Specialties part #4401-0072

• 1 Meter (3.3’) audio cable
• Connects your MP3/GPS or Satellite radio to the "aux in” on front of radio
• High quality gold plated connectors
• 90° connectors on both ends make for the cleanest install on your bike
• A perfect add on if you have Hogtunes WS BAG windshield bad
(Drag part# 3508-0023)

Finally—An Audio Cord Made For A Bike!
Tab 2
1998- 2013 Road Glide®
2011- 2013
Road Glide® Ultra
Tab 3
Stacks Image 14955
thex Created with Sketch.
Tab 4
PDF Manual Download
Stacks Image 15087
  • Overview
  • BIke Year/Model Fitment
  • Videos
  • Installation Manual
Tab 1
Only $15.95 USD
CIG-USB Charger
Drag Specialties part #2130-0105

• Convert any cigarette lighter socket to USB charger (1 Amp max)
• Unlike the “cheapo’s” this unit is made of fire rated plastic and cannot overheat
• Will charge most smart phones and music devices
• When your FLH is turned allt he way to the left, this unit will not hit your gas tank!

Turn Your Lighter Socket Into A USB Chargeport!
Tab 2
Works with any standard 12 volt lighter socket
Tab 3
Stacks Image 15112
thex Created with Sketch.
Tab 4
PDF Manual Download
Stacks Image 15665